Caterpillar C18 Diesel Generator Set, 480 kW, 2012
CaterpillarModel:C18
Houston, TX
Diesel Generator Sets
Qty:1
Condition: Used
Request priceIn stock
Request pricing and the seller will follow up.
Sign in to submit an offer. Final pricing is subject to seller agreement.
Listing details
Key specifications
- Aftertreatment
- Remote mounted, inside the enclosure Manufacturer document
- Alternator Design
- Brushless Single Bearing, 4 Pole Manufacturer document
- Aspiration
- Air-to-Air Aftercooled Manufacturer document
- Available Excitation Options
- Self-Excited Manufacturer document
- Bore
- 145 mm (5.71 in) Manufacturer document
- Bore x Stroke
- 145 mm x 183 mm (5.7in x 7.2in) Manufacturer document
- CO
- 506.5 mg/Nm³ (1.0 g/hp-hr) Manufacturer document
- Combustion Air Inlet Flow Rate
- 32.3 m³/min (1142.0 cfm) Manufacturer document
- Combustion air inlet flow rate, m³/min (cfm)
- 32.2 m³/min (1137 cfm)
- Combustion air inlet temp, °C (°F)
- 50 °C (122 °F) Manufacturer document
- Combustion System
- Direct Injection Manufacturer document
- Compression Ratio
- 14:1 Manufacturer document
- Controller
- GCCP1.3 Manufacturer document
- Current
- 866 amps Manufacturer document
- Current, A
- 696 A
- Displacement
- 18.1 L ( 1106 in³) Manufacturer document
- Emission Strategy
- Meets India CPCB-IV+ standard Manufacturer document
- Emissions
- Low BSFC Manufacturer document
- Engine coolant capacity, L (gal)
- 21 L (5.5 gal) Manufacturer document
- Engine Model
- Cat C18 In-line 6 Cylinder, 4-Cycle Diesel Manufacturer document
- Engine Power Rating, BKW
- 432 BKW Manufacturer document
- Excitation
- SE Manufacturer document
- Exhaust gas flow rate, m³/min (cfm)
- 88.8 m³/min (3136 cfm) Manufacturer document
- Exhaust stack gas temperature, °C (°F)
- 523.2 °C (974 °F) Manufacturer document
- Exhaust system backpressure (maximum allowable), kPa (in. water)
- 10.0 kPa (40 in. water) Manufacturer document
- Frame Size
- LSAP47 C Manufacturer document
- Frequency
- 50 Hz Seller-provided
- Fuel
- Diesel Seller-provided
- Fuel Injection System
- MEUI Manufacturer document
- Fuel Strategy
- LOW FUEL CONSUMPTION Manufacturer document
- Fuel System
- Electronic unit injection Manufacturer document
- Fuel Tank
- Integrated base mounted Manufacturer document
- Fueling strategy
- India CPCB/ MoEF Standards Manufacturer document
- Gen set power rating with fan @ 0.8 power factor, kVA
- 500 kVA
- Genset Power Rating
- 600 kVA Manufacturer document
- Governor
- Electronic ADEM™ A6 Manufacturer document
- HC
- 2.6 mg/Nm³ (0.0 g/hp-hr) Manufacturer document
- Heat Rejection to Aftercooler
- 79 kW (4475 Btu/min) Manufacturer document
- Heat Rejection to Atmosphere from Engine
- 79 kW (4468 Btu/min) Manufacturer document
- Heat rejection to atmosphere from engine, kW (Btu/min)
- 34.4 kW (1956 Btu/min)
- Heat Rejection to Atmosphere from Generator
- 24 kW (1354 Btu/min) Manufacturer document
- Heat rejection to atmosphere from generator, kW (Btu/min)
- 23.2 kW (1319 Btu/min)
- Heat Rejection to Exhaust (Total)
- 458 kW (26037 Btu/min) Manufacturer document
- Heat rejection to exhaust (total), kW (Btu/min)
- 422 kW (23999 Btu/min)
- Heat Rejection to Jacket Water
- 157 kW (8947 Btu/min) Manufacturer document
- Heat rejection to jacket water, kW (Btu/min)
- 139 kW (7905 Btu/min)
- Insulation
- Class H Manufacturer document
- Max. Allowable Combustion Air Inlet Temp
- 47 ° C (116 ° F) Manufacturer document
- Motor Starting Capability @ 30% Voltage Dip
- 2064 skVA Manufacturer document
- Motor Starting Capability @ 30% Voltage Dip skVA
- 1207 skVA
- No. of Leads
- 06 Manufacturer document
- NOx
- 3490.3 mg/Nm³ (6.9 g/hp-hr) Manufacturer document
- Performance
- Prime Manufacturer document
- Performance number
- EM6970 Manufacturer document
- PM
- 4.7 mg/Nm³ (0.0 g/hp-hr) Manufacturer document
- Protection Standard
- IP23 Manufacturer document
- Rating
- 480 kWe Seller-provided
- Rotation (from flywheel end)
- Counterclockwise Manufacturer document
- Standard Temperature Rise
- 125°C
- Stroke
- 183 mm (7.2 in) Manufacturer document
- Sump refill with filter, L (gal)
- 74 L (19.5 gal) Manufacturer document
- Telematics
- Factory fitted Product Link Manufacturer document
- Temperature Rise
- 105 ° C Manufacturer document
- Temperature Rise @ 40°C
- 125
- Total cooling system coolant capacity, L (gal)
- 70 L (19 gal)
- Voltage Regulation
- ±1% Manufacturer document
- Voltage Regulator
- R150 Manufacturer document
Policies
- Shipping
- Resin8-facilitated freight, buyer-arranged freight, or local pickup. Buyer pays all shipping and logistics costs; delivery time varies by seller location and method, with a shipping quote at checkout.
- Returns
- Sold as-is, where-is. No returns accepted; all sales are final.
- Marketplace terms
- Resin8 is a marketplace facilitator, not the seller. Using the marketplace or completing a transaction means you agree to Resin8's User, Buyer, and Seller Agreements.